KLD-Serio latuna unu-tuŝa aero pneŭmatika tubaro
Teknika Parametro
| Fluido | Aero, se vi uzas likvaĵon, bonvolu kontakti fabrikon | |
| Maksimuma.labora Premo | 1.32Mpa (13.5kgf/cm²) | |
| Premo Range | Normala Labora Premo | 0-0,9 Mpa (0-9,2 kgf/cm²) |
|
| Malalta Labora Premo | -99.99-0Kpa (-750~0mmHg) |
| Ĉirkaŭa temperaturo | 0-60℃ | |
| Aplika Pipo | PU Tubo | |
| Materialo | Latuno | |
| ModeloD (mm) | M | Dxd | L1 | L1 | L | S1 | S2 |
| KLD4-M5 | M5 | 4×2.5 | 5.5 | 14 | 30 | M5 | 8 |
| KLD4-01 | PT 1/8 | 4×2.5 | 7.5 | 20 | 36 | 10 | 8 |
| KLD4-02 | PT 1/4 | 4×2.5 | 8.5 | 21 | 37 | 14 | 8 |
| KLD6-M5 | M5 | 6×4 | 5.5 | 13 | 29.5 | M5 | 10 |
| KLD6-01 | PT 1/8 | 6×4 | 7.5 | 20 | 36 | 10 | 10 |
| KLD6-02 | PT 1/4 | 6×4 | 8.5 | 21 | 37 | 14 | 10 |
| KLD6-03 | PT3/8 | 6×4 | 9.5 | 22 | 38 | 17 | 10 |
| KLD6-04 | PT 1/2 | 6×4 | 10.5 | 23 | 39 | 21 | 10 |
| KLD8-01 | PT 1/8 | 8×5 | 7.5 | 20 | 40 | 11 | 13 |
| KLD8-02 | PT 1/4 | 8×5 | 8.5 | 21 | 41 | 14 | 13 |
| KLD8-03 | PT3/8 | 8×5 | 9.5 | 22 | 42 | 17 | 13 |
| KLD8-04 | PT 1/2 | 8×5 | 10.5 | 23 | 43 | 21 | 13 |
| KLD10-01 | PT 1/8 | 10×6.5 | 7.5 | 21 | 43 | 14 | 15 |
| KLD10-02 | PT 1/4 | 10×6.5 | 8.5 | 22 | 44 | 14 | 15 |
| KLD10-03 | PT3/8 | 10×6.5 | 9.5 | 23 | 45 | 17 | 15 |
| KLD10-04 | PT 1/2 | 10×6.5 | 10.5 | 24 | 46 | 21 | 15 |
| KLD12-01 | PT 1/8 | 12×8 | 7.5 | 24 | 50 | 17 | 18 |
| KLD12-02 | PT 1/4 | 12×8 | 8.5 | 25 | 51 | 17 | 18 |
| KLD12-03 | PT3/8 | 12×8 | 9.5 | 26 | 52 | 17 | 18 |
| KLD12-04 | PT 1/2 | 12×8 | 10.5 | 27 | 53 | 21 | 18 |
